Measuring for a perfect fit. To determine the correct panel size, make the following measurement:
Measure the height of present screen panel from top to bottom (measurement A). Measure width of panel (measurement B). All panels are 24" wide. If your panel is less than 24", the extra drape adds to the beauty of your fireplace. For panel widths over 24", click here on custom panels. Panel heights are in full inch increments. Order panel height which is closest to your original panel height. Panels ordered longer than your panel height may drag on fireplace hearth. Check clearance before purchasing.
-
If you have no screen to measure from, take the following steps:
If sliding rod is present, measure the heights from top of sliding rod to bottom of fireplace hearth, (measurement C). Deduct approx. 3/4" to 1" from total height. Choose the nearest replacement set, make sure overall height is not too tall, otherwise panel will drag on hearth. If no sliding rod is installed see sketch below and it will guide you through the correct measuring steps. To determine the widths of the panels measure total width of fireplace opening add approx. 40% for fullness divide by 2 (two) which will give you the minimum measurement per panel width. All our replacement panels are 24" wide
In Need Of A Custom Screen? Click Here
How To Install Your New Screen Click Here
Need To Change The Height Of Your Panel? Click Here
Need To Change The Width Of Your Panel? Click Here